您当前所在的位置: 学院首页 -> 科学研究 -> 科研成果 -> 正文

我院教师部分论文

作者:张明康   编辑:机械与能源工程学院   审核人:陈扬枝   来源:无   发布日期:2021-06-23

(1) Chen Y Z* , Xie X D . Two-step method of nanosecond pulse laser ablation manufacturing of miniature bevel line gears[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2020, 235(6):095440542093244.SCIQ3

(2) Chen Y* , Lin Y . A calculation method for friction coefficient and meshing efficiency of plastic line gear pair under dry friction conditions[J]. Friction, 2020.10.1007/s40544-020-0424-x.SCIQ1

(3) Chen Y*, Xiao X , Zhang D , et al. Design method of a novel variable speed ratio line gear mechanism[J]. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996 (vols 203-210), 2020:095440622093772.SCIQ3

(4) Xie X D, Chen Y Z* and Shao Y J. The Design And Evaluating Method for The Scanning Strategy in Nanosecond Laser Milling of Axisymmetric 3D Structure Micro Cone Considering Its Symmetric Errors[J].Journal of Laser Micro/Nanoengineering ,2020,15(1):31-37.SCIQ3

(5) Chen Y*, Hu Y , Lyu Y , et al. Development of a form milling method for line gear: principle, CNC machine, cutter, and testing[J]. International Journal of Advanced Manufacturing Technology, 2020, 107(3-4):1-11.SCIQ2

(6) Chen Y Z*, Zhu A , Lyu Y . Parameter design methodologies for vertical skewed line gears taking lubrication performance into account[J]. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 2019.SCIQ3

(7) Chen Y Z*, Xie X, Xiao X.An Evolving Model of Surface Profile Produced by Nanosecond laser Ablation on Aluminum Alloy[J].Journal of Laser Micro/Nanoengineering, 2019, 14(2).SCIQ3

(8) Y.Z. Chen*, Li Yao.Study on a method of CNC form milling for the concave convex arc line gear [J]. Int. J. Adv. Manuf. Technol., 2018,Doi.10.1007/s00170-018-2566-9. (SCI,Q2)

(9) Y.Z. Chen*#, H.F. Chen, Y.L. Lv, A.S. Zhu. Study on Geometric Contact Model of Elastohydrodynamic Lubrication of Arbitrary Intersecting Line Gear. Lubrication Science, 2018. (SCIQ3)

(10) Y.M. Da(研究生)i, Y.Z. Chen, L.H. Xie, A study on a novel two-body floating wave energy converter. Ocean Engineering,2017,130:407-416.SCIQ1

(11) Y.Z. Chen, H. Huang, Y.L. Lv. A variable-ratio line gear mechanism. Mechanism and Machine Theory, 2016, 98:151-163. (SCI, Q1)

(12) Mingkang Zhang; Yongqiang Yang; Meizhen Xu; Jie Chen; Di Wang; Mechanical properties of multi-materials porous structures based on triply periodic minimal surface fabricated by additive manufacturing. Rapid prototyping journal, 2021.

(13) Mingkang Zhang; Yongqiang Yang; Wentao Qin; Shibiao Wu; Jie Chen; Changhui Song; Optimizing the pinch-off problem for gradient triply periodic minimal surface cellular structures manufactured by selective laser melting. Rapid prototyping journal, 2020, 26(10): 1771-1781.

(14) Mingkang Zhang; Yongqiang Yang; Di Wang; Changhui Song; Jie Chen; Microstructure and mechanical properties of CuSn/18Ni300 bimetallic porous structures manufactured by selective laser melting. Materials & design, 2019, 165:107583.

(15) Mingkang Zhang; Yongqiang Yang; Changhui Song; Yuchao Bai; Zefeng Xiao; An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting. Journal of Alloys and Compounds, 2018, 750: 878-886.

(16) Mingkang Zhang; Yongqiang Yang; Di Wang; Zefeng Xiao; Changhui Song; Changwei Weng; Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2018, 736: 288-297.

(17) Mingkang Zhang; Yongqiang Yang; Changhui Song; Yuchao Bai; Zefeng Xiao; Effect of the heat treatment on corrosion and mechanical properties of CoCrMo alloys manufactured by selective laser melting. Rapid Prototyping Journal, 2018, 24(7): 1235-1244.

(18) 骆仕斌, 李爱娜. 大型液晶电视外壳双层结构注塑模具设计. 塑料, 2018(4):94-98.

(19) 骆仕斌, 李爱娜. 基于宏程序的楔形防松螺纹数控功能开发. 机床与液压, 2019, 047(016):87-92.

(20) 骆仕斌, 李爱娜, 黄松福,邱英洋. 7075铝合金偏心薄壁件高速车削加工应用方法研究. 机械工程师, 2019, 000(008):173-175,180.

(21) 骆仕斌,电视悬挂支架模内攻牙多工位连续模设计.机电工程技术, 2019,48(08):168-171.

(22) 秦志南, 雷熙平.有限理性视角下的设计思考[J]. 工业设计, 2018, 000(003):100-101.

(23) Qin Z , Chen L , Lei X P . Research on Immersive Virtual Assembly Based on Virtual Reality Technology[C]// The 2nd Asia-Pacific Management and Engineering Conference (APME 2016). 0.

(24) 关泽飘. 对一起电梯轿门电气安全触点失效的思考.中国设备工程,201907103-104.

(25) 关泽飘. 起升机构电动机定子异常失电保护的安全检验与分析.中国特种设备安全,20201140-44.

(26) 关泽飘. 机械式停车设备的电气检验及缺陷改进.起重运输机械,20201250-54.

(27) 关泽飘. 例说机械式停车设备的电气审查.中国电梯,20210369-72.

(28) Yuezhu Mo, D.G. Yang, Miao Cai, Dongjing Liu, Yaoyao Nie. Thermal transfer influence of delamination in the die attach layer of chip-on-board LED package base on entropy generation analysis[C]Electronic Packaging Technology (ICEPT), 2016 17th International Conference on.

(29) Changxian Liu, Jing He, Zhen Xie. High voltage ride-through of grid-side converter for PMSG based directly driven wind turbines[C]. 2016 35th Chinese Control Conference.